JL.RAYA GATOT SUBROTO NO. 89 KM 6.2 JATIUWUNG TANGERANG
Phone WA (+62)21 590284 Handphone 087883986257
Pneumatic Top Guided Single-Seated Angle Control Valve
The HAP series Pneumatic top guided single-seated angle control Valve applied with an unbalanced plug, this top guided single seated angle control valve requires a large actuator output force. The size is reduced by incorporating a fine designed multi-spring diaphragm actuator. This series is a good application for slurry polymer crystallization and high-temperature fluid as the pressure balanced structure is not used here.
Size:
1/2' ~ 2'
ANSI Class:
150 ~ 2500LB
Body Materials:
A216 WCB, A216WC6, A352 LCB, A351 CF8, A351 CF8M, A351 CF3M, A351 CF3
Temperature Range:
-196 ~ +550°C
Description:
Performance Characteristics
1. Can be used for high-pressure situations and capable of situations with slurry polymer crystals and high-temperature fluid.
2. This valve is with advantages of simple structure, easy maintenance, which is a cost-effective control valve.
3. This series is limited for small valve size due to the unbalanced trim structure, and the maximum valve size should be within DN50.
Specifications
Body Size: 1/2″(DN15)~2″(DN50)
Body Rating: ANSI Class 150#~2500#
Fluid Temperature: -196~+550℃
Connections: Flanges(FF,RF,RJ,RTJ),Socket Weld, Butt Weld(SW,BW)
Body Materials: WCB,WC6,LCB,CF8,CF8M,etc.
Plug Materials: 316,316+Stellite,316+RTFE etc.
Seat Leakage: ANSI Class IV(Cv×0.01%)
Rangeability: 30:1~10:1
Flow Characteristics: Linear, EQ%
Product Advantage
1. Especially be suitable for controlling fluid with high viscosity, suspended solids, and granules and being able to avoid coking, bonding, blocking.
2. The fluid flow can be side-in and bottom-out in case of high pressure. So the flow would go through the cage first and then to the valve plug and seat to avoid direct eroding the sealing surface of the plug and seat, this helps to prolong the service life.
Additional information :
Size:
1/2' ~ 2'
ANSI Class:
150 ~ 2500LB
Body Materials:
A216 WCB, A216WC6, A352 LCB, A351 CF8, A351 CF8M, A351 CF3M, A351 CF3
Temperature Range:
-196 ~ +550°C
PT. SARTINDO LAMTABO SEJAHTERA, Based in Tangerang INDONESIA. Sartindo is a leading supplier for Mechanical, Electrical, Feedmill Parts engineering products across a broad platform of industries. We are the benchmark in..
Selengkapnya