PT.SARTINDO LAMTABO SEJAHTERA
Visit us
JL.RAYA GATOT SUBROTO NO. 89 KM 6.2 JATIUWUNG TANGERANG
Phone WA (+62)21 590284 Handphone 087883986257
PVDF Products
Description
PVDF is a high-performance fluoroplastic with excellent chemical resistance, good weather resistance, high mechanical strength and piezoelectricity, and a wide operating temperature range. It can be made into pipes, films, electronic components and medical products, and is widely used in chemical, electronic and other fields.
PVDF Products
Type and Specifications
Application
In the chemical industry, it is used to make corrosion-resistant pipes and valves; in the electronics industry, it serves as insulating materials and sensors; in the medical field, it is applied to products such as infusion sets; in construction, it acts as weather-resistant coatings. It is also used in lithium battery separators and water-treatment membranes, adapting to multiple scenarios with its chemical resistance, mechanical properties, and piezoelectricity.
Main Properties — PVDF
General Material Properties
-
Melting Point: 175°C
-
Density: 1.76–1.78 g/cm³
-
Hardness: D75–D85
Mechanical Properties
-
Tensile Strength: 40–85 MPa
-
Elongation at Break: 300–450%
-
Impact Strength: 1105 J/m (ASTM D256)
Thermal Properties
-
Continuous Service Temperature: −40 to 150°C
Electrical Properties
-
Dielectric Constant (1 kHz): 6.43
-
Volume Resistivity: >10¹⁵ Ω·cm
(All properties tested according to ASTM standards: D792, D638, D256, D150, D257.)
Type and Specifications
Sheet
-
Width: 630–2000 mm
-
Length: 2000–4000 mm
-
Thickness: 3–100 mm
Rod
-
Diameter: 10–250 mm
-
Length: 1000 mm
Welding Rod
-
Sizes: 3×3×4, 3×3×5, 4×4×6
-
Diameter Options: Φ3, Φ4, Φ5
Pipe
-
Diameter: DN15–DN300
-
Outer Diameter (OD): 20–40 mm
-
Wall Thickness (S): 3–5 mm
-
Length: 50–160 mm
Butt-weld Fittings
-
OD: 20–225 mm
Socket Fittings
-
OD: 26–130 mm
-
Wall Thickness (S): 1.5–10 mm
Valve
-
Diameter: DN15–DN300
Statistik Pengunjung
